You are here

Pasila - AV control system - Helia House 2

Pasila - AV control system - Helia House 2
  • If the second number of the classroom is 0, then you are in Helia House 1, e.g. 3009
  • If the second number of the classroom is 2, then you are in Helia House 2, e.g. 4204

One projector classrooms

The AV controller panel in the single projector classroom

Press the start button on the touch-screen to start the projector. Wait for the projector to warm up. When the projector is on, select the desired source from the white buttons.

  •  PC: Teachers desktop computer
  •  LAPTOP 1: HDMI cable on the table for your laptop
  •  LAPTOP 2: VGA cable on the table for your laptop.

If you're using a VGA connection, and want to play sound out of the classroom speakers, connect the audio plug into the headphones jack of the laptop.

  • DOC CAM: The document camera is controlled with the devices own buttons.
  • DVD: The DVD/VHS -player is controlled with the devices own buttons. Devices only in rooms: 1205, 2204, 5231b, 6211

On the right side of the AV controller are the buttons for the following functions:

  • FREEZE: Freezes the image. Press the button again to unfreeze image.
  • VIDEO MUTE: Hides the image. Pressing the button again unhides the image.
  • AUDIO MUTE: Mutes the sound. Pressing the button again unmutes the sound.

Use the control on the bottom right corner of the AV controller to adjust the volume level. Volume level is indicated on the screen while adjusting the level. The projector must be turned on when playing audio.
Turn off the system by pressing the red "Shut Down" button on the touch screen and confirm the selection.
 

Dual projector classrooms

The AV controller in the dual projector classroom
Press the start button for projector 1, projector 2 or both to start. Wait for the projector(s) to warm up. When the projector is on, select the desired source from the white buttons.

  • PC: Teachers desktop computer
  • LAPTOP 1: HDMI cable on the table for your laptop
  • LAPTOP 2: VGA cable on the table for your laptop.

If you're using a VGA connection, and want to play sound out of the classroom speakers, connect the audio plug into the headphones jack of the laptop.

  • DOC CAM: The document camera is controlled by the devices own buttons.
  • DVD: The DVD/VHS -player is controlled with the devices own buttons. Can be displayed only on one projector. Devices only in rooms: 4203, 4204, 8202c

If you are using the dual projector mode select projector 1 or projecor 2 for the the selected source on the touch-panel. If you started using one projector you can switch to dual projector mode by pressing the start button in the middle of the touch-screen ("Use both projectors").

On the right side of the AV controller are the buttons for the following functions:

  • FREEZE: Freezes the image. Select projector 1, projector 2 or both. Press the button again to unfreeze image.
  • VIDEO MUTE: Hides the image. Select projector 1, projector 2 or both. Pressing the button again unhides the image.
  • AUDIO MUTE: Mutes the sound. Pressing the button again unmutes the sound.

Use the control on the bottom right corner of the AV controller to adjust the volume level. Volume level is indicated on the screen while adjusting the level. The projector must be turned on when playing audio.

Shut down

The shut-down buttons on the AV controller in the dual projector classroom

To end the session, shut down a document camera, remove discs and cassettes from devices and press [PROJ. OFF]

Turn off the system by pressing the red "Shut Down" button on the touch screen and confirm the selection by pressing the shut down -button for the both projectors. You can also shut down only one projector and continue using the system with the other projector.